canon eos rebel t1i manual mode stays underexposed

The benefit for them is now they get manual controls first week in June. I basically have used the exact techniques the 5D crew has used and it works the same. Then the camera will only control the ISO and shutter and you have the desired aperture you prefer. Then the lens is locked in aperture you have selected. Lock the exposure then turn the lens just a bit so the connectors disconnect. Another trick you can use is cover the front of the lens and watch the aperture open up as much as it can. It's much easier controlling it that way. I use primes Nikon primes with the cam so the camera only controls the ISO and shutter. If you use a 2.8 lens or a 4.0 lens through, then there is no aperture change and the exposure lock does not change. It's the same thing with the 5D till you get the firmware update. The camera reads this and will compensate the exposure. For instance if your wife has the kit lens which is 3.5-5.6 the aperture changes when zooming in. If your lens is not the same F-stop it will reset the exposure lock upon zooming with the lens. It is a exposure compensation as you state. Then the dial will lower the ISO then shutter or vice versa if your outside. Then the camera only controls the ISO and shutter. If you use a nikon lens you can control the aperture. You just make the image darker or brighter but the camera decides what gets changed.Īnd the exposure lock doesn't hold if you adjust the zoom setting on the lens. This is just an exposure compensation, you can't really control shutter, aperture or ISO by doing this.

Canon eos rebel t1i manual mode stays underexposed